Caller ID Control
This feature enables you (from idle) to allow or restrict the presentation of your phone number from appearing on the display
of the called external party (as well as internal party, depending on system-wide settings). Your telephone is pre-set in the
system to either restrict or display for all calls. Use
Press
to dial using ID Control.
[CID]
Operating Caller ID Control:
1. Press
.
[CID]
2. Dial the number.
3. Your call automatically connects. If your Coral system is set to restrict caller ID, it will now be presented to the called
party, and vice versa.
NOTE!
When you have a Caller ID programmed key, the LED is lit when Caller ID Control is restricted
from your station.
Station Telephony Features
Caller ID Control
[CID]
10:50
Page 1
[CID]
→
DIAL
Page 2
ID. RESTRICTED
***** Enter Destination ****
to override this setting on a per-call basis (if permitted by COS).
26 May 2007 Company xyz
user name
station number
Wake
cIns
81
GpCl
T207M / T208M User Guide
Need help?
Do you have a question about the T207M and is the answer not in the manual?