Making Internal Calls - Tadiran Telecom T207M User Manual

Making Internal Calls

Upon Hearing Ringback Tone
After dialing an internal destination number, the following features appear on your phone display when you hear a ringback
tone. Wait for answer or press the nearby soft key to activate the required feature.
See for further details.
page 19
A message indicating the called party's status (or other relevant information) may appear on the
NOTE!
second line of the display until you answer the call
or MSG Leave Message. If no one answers your call, use this feature to leave a "message" at the called party's
[Msg.]
station. This feature lights the message waiting lamp at the called party's station indicating that a message
was left, and it leaves a simple message such as CALL SUSAN on the destination station's keyset display.
See
Messages: Options on page 141
Message Waiting. The Attendant can use this feature to leave a message waiting indication at a busy or idle
[MsgW]
station, room or group. See
Camp On, also known as Call Back. When a station does not answer, you may request that the system
[Camp]
automatically call you back when the required destination number is available. See
.
page 84
Voice Page the called party's keyset station using this feature. Your call is automatically answered and your
[VPg]
voice heard over the called party's speakerphone. See
Operating the Phone
Making Internal Calls
INTERNAL called number or name
↓→ Msg.
Camp
.
Leaving a message indication at a busy or non-answering station: on page 143
(see Canned Messages on page
VPg Mute
Paging: Voice Paging on page 161
31
87).
.
Camp On (Call Back) on
.
T207M / T208M User Guide