Tadiran Telecom T207M User Manual page 235

boss group, keyset voice page, zone group page, page public address, UNA/central bell, outside trunk call,
public and private speed dial, pre-recorded DVMS message, group call, and network number.
NOTE! Hot Station Delay is not applicable for SIP telephones, such as: T207S and T208S.
Hot Station Immediate is used to program a telephone to immediately ring another station, automatically
[HotI]
connect to a paging device, or automatically dial out immediately when the handset is taken off-hook, or
is pressed (or upon dialing from T207S and T208S telephones). Possible destinations are operator,
SPKR
station, hunt group, boss group, keyset voice page, zone group page, page public address, UNA/central bell,
outside trunk call, public and private speed dial, pre-recorded DVMS message, group call, and network
number.
♦
Originating Only is used to prohibit incoming calls from arriving at a station. In this case the user can only
[OrgO]
make outgoing calls, but is unable to receive calls. A caller to this station will hear the reorder tone.
♦
Outgoing Call Restriction is used to prevent a station from making outgoing trunk calls.
[noTK]
♦
Station Blocking is used to temporarily prevent a station from both making and receiving calls. A caller to
[Blck]
this station will hear the reorder tone.
♦
Terminating Only is used to prohibit a station from originating any telephone calls (internal or external).
[TrmO]
When defined as Terminating Only, the user can receive calls, but is unable to make calls.
Attendant Features
Station Setup Features
224 T207M / T208M User Guide