Tadiran Telecom T207M User Manual page 46

Voice Page the called party's keyset station using this feature. The other party receives a message that they
[VPg]
are being paged. Your voice is heard over the called party's speakerphone after the warbling tone stops. See
Paging: Voice Paging on page 161
Number is used to briefly display the caller's dial number instead of the name.
[Num]
or MUTE Mute can be activated during busy tone so that if you break-in, your side of the conversation is muted for
[Mute]
silent monitoring (handset, headset and speakerphone). When this feature is activated by the
on/off toggle switch, a bullet appears to the left of
deactivates the microphone for your speakerphone and handset or headset. Press the toggle key again to
reactivate the microphone. See
2-Way Silent Monitoring is used to monitor both sides of a 2-way conversation simultaneously. This feature
[SM2]
can be activated from idle, or while attempting to call a busy or non-answering destination. At the prompt,
dial the station or dial number. See
Calls Waiting can be used to view the number of calls waiting for you during a conversation. See
[Wait]
ACD and UCD Hunt Groups on page 59
Operating the Phone
Making Internal Calls
.
and MUTE LED is lit red. The mute feature
[Mute]
Mute Microphone on page
Silent Monitoring on page 187
.
35
155.
.
T207M / T208M User Guide
or MUTE
[Mute]