Tadiran Telecom T207M User Manual page 52

Upon Hearing Ringback Tone
After dialing an external destination number, the following features appear on your phone display when you hear the ringback
tone. Wait for an answer or press one of the soft keys to activate the required feature.
or MSG Leave Message is used when dialing a network destination.
[Msg.]
If no one answers your call, use this feature to leave a "message" at the called party's station. This feature
lights the message lamp at the called party's station indicating that a message was left, and a simple message
such as CALL SUSAN is left on the destination station's keyset display. See
.
page 141
or MUTE Mute can be activated during ringback so that when the call is answered your side of the conversation is
[Mute]
muted and the called party will not hear you. When this feature is activated by the
toggle switch, a bullet appears to the left of
microphone for your speakerphone and handset or headset. Press the toggle key again to reactivate the
microphone.
Auto Redial is used to have the system automatically redial the unanswered destination. Further redial
[ARdl]
options are available after activation (see
1. Press
[ARdl]
2. When the called party answers, press the flashing
Elapsed Time - not used during ringback.
[Elps]
Calls Waiting is used to view the number of calls waiting for you. See
[Wait]
.
page 59
Operating the Phone
Making External Calls
OUT trunk line
DIAL outside telephone number
↓→ Msg.
Camp
(see Mute Microphone on page
. The system will now automatically redial at timed intervals.
Mute Elps
and MUTE LED is lit red. The mute feature deactivates the
[Mute]
155).
.
Redial on page 179)
key or lift the handset to enable conversation.
SPKR
41
Messages: Options on
or MUTE on/off
[Mute]
ACD and UCD Hunt Groups on
T207M / T208M User Guide