Call Hold/Resume; Do Not Disturb (Dnd) - Tadiran Telecom T41P User Manual

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress at any time.
Other calls can be made and received while placing the original call on hold. When you
place a call on hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1. Press the Hold soft key during a call.
The line key LED flashes green. The LCD screen indicates that the call is on hold.
Note
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.
To resume a held call:
1. Press the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press
to retrieve the desired call.
- Press the corresponding line key to retrieve the call.
If more than one call is placed on hold, a numbered prompt appears on the LCD screen,
for example "2/3", indicating that this is the second call out of three calls.

Do Not Disturb (DND)

You can use DND to reject incoming calls automatically on the phone. The prompt
message "n New Missed Call(s)" ("n" indicates the number of missed calls) will appear
on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is enabled are logged to your missed calls list.
Note
The prompt message will display only if Missed Call Log for the line is enabled. For
additional details on DND and call routing, please refer to
for End Users
.
Do not disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
24
or to switch between the calls, and then press the Resume soft key
User Guide for the T41P IP Phone
Aeonix Configuration Guide