Tadiran Telecom T207M User Manual page 251

Idle Display. When in Idle mode, the first line of the display shows the time, date and site name, and the
[Dsp]
second line displays your name and station number. Press
Language. Use this feature to set the language for your phone display. The languages available differ
[Lang]
according to the country. Scroll using
Passcode. Your phone can be defined with a unique passcode known only to you. This passcode allows you
[Pass]
(if defined in your COS) to operate certain Coral FlexiCom features such as Phone Lock, Executive
Privilege, Auto Set Relocate and COS Switchover. You can define the 4-digit passcode for your phone only at
your own phone. Save your passcode in a safe place.
To define your passcode (when no passcode is currently defined):
1. Press
[Pass]
2. Enter your new passcode number at the prompt.
3. Redial the number to confirm, and listen for the confirmation tone.
To change your passcode:
1. Press
[Pass]
2. Enter your old passcode number at the prompt, followed by your new passcode number.
3. Redial the number to confirm, and listen for the confirmation tone.
CAUTION!
Once a passcode has been defined, the code is known only to you. If you forget the passcode you
will not be able to utilize the features that require the code. Therefore, write your passcode number in
a secure place for future reference.
Program Key. The phone comes equipped with 9 system-defined (fixed) keys as well as user programmable
[Prog]
keys. You are able to program most of the programmable keys from the phone itself. The programmable keys
may be assigned to directly access other stations, station groups, trunks, trunk groups, or system features.
See
Programming: Feature Keys on page 167
Setup
Coral Telephony Features
[Next]
.
.
to toggle the display of the system lines on/off.
[Dsp]
and , and then press
[Prev] [Set]
for instructions on how to program a DSS key.
240
to chose the language.
T207M / T208M User Guide