Tadiran Telecom T207M User Manual page 45

Upon Hearing Busy Tone
After dialing an internal destination number, the following features appear on your display when you hear a busy tone. Hang
up or press one of the soft keys.
or MSG Leave Message. Use this feature to leave a "message" at a busy station. This feature lights the message
[Msg.]
waiting lamp at the busy station and leaves a simple message such as CALL SUSAN on the destination
station's keyset display. See
Message Waiting. The Attendant can use this feature to leave a message waiting indication at a busy or idle
[MsgW]
station, room or group. See
Camp On, also known as Call Back. Use this feature to have the system automatically call you back when
[Camp]
the busy destination station is available. See
Break-In enables an authorized user to break into an established two party call. Both conversing parties will
[BrkI]
hear the Break In warning tone. Your voice will be heard after the warning tone stops. During Break-In you
can release the ports or alternate between parties. See
NOTE! Only stations with appropriate COS may activate the Break-In feature.
Send Call Waiting is used to send a call waiting tone to the busy party. This feature is also known as Call
[2Rng]
Waiting or Call Offer. The station is now aware that another call is waiting. Your side hears a second
(quicker) ringback tone (system-wide defined).
Operating the Phone
Making Internal Calls
BUSY called number or name
↓→ Msg.
Camp
Messages: Options on page 141
Leaving a message indication at an idle station: on page 142
VPg Mute
.
Calls Waiting: Receiving on page 82
During a Break In on page 38
34
.
.
.
T207M / T208M User Guide