Tadiran Telecom T207M User Manual page 239

Alternate Attendant Destination. This feature enables you to program an alternate attendant destination or
[ATT2]
extension if the console is left unattended. After a time-out period, incoming calls to an unattended console
will be re-routed to the selected destination and the attendant console will go into Unattended mode
(see
Do Not Disturb (DND) on page 101)
back to Attended mode and the alternate destination back to normal operation.
Possible destinations are station, hunt group, boss group, UNA/ central bell, pre-recorded DVMS message,
public/private speed call, and group call.
Program an alternate destination in the following way:
1. Press
[ATT2]
2. Dial the destination number where calls are to be forwarded, OR
Choose
Choose [Canc] to cancel the alternate destination.
3. Listen for the confirmation tone.
Day/Night Transfer toggle feature. Press
[XD/N]
various Day/Night service modes and back again. When set to Auto Transfer, a bullet is displayed next to
.
[XD/N]
When set to Automatic, the system will transfer service modes without attendant supervision.
When set to Manual, the attendant must decide when to change modes using
Day/Night 1 toggles between Day (normal mode) and Night 1 service modes. When set to Night 1, a bullet is
[D/N1]
displayed next to
Day/Night 2 toggles between Day (normal mode) and Night 2 service modes. When set to Night 2, a bullet is
[D/N2]
displayed next to
Use the table below to enter the relevant information concerning Day/Night Transfer. Contact your system
administrator for Day/Night Transfer times and destinations.
Attendant Features
System Features
.
to change the destination, OR
[Dest]
.
[D/N1]
.
[D/N2]
. Any action that is performed at the original console will force it
to switch from automatic to manual transfer between the
[XD/N]
228
and (see below).
[D/N1] [D/N2]
T207M / T208M User Guide