Exhaust Fan Filter Replacement - MIMAKI UCJV300 Series Operation Manual

Chapter 6 Maintenance
2
Select [TOOL CHANGE], then press the [ENTER] key.
• The cutter unit moves over the platen.
3
Open the front cover.
• The cutter unit can be moved manually. Move the carriage slowly to a position allowing
easy access for replacing the cutter.
4
Replace the media cutter.
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Attach a new cutter.
(4) Tighten the screw to clamp the cutter.
5
Press the [ENTER] key once replacement is complete.
6
Close the front cover, then press the [ENTER] key.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.

Exhaust Fan Filter Replacement

Check the exhaust fan filter condition. Replace if very dirty.
Screw
154