If image quality declines
Corrective measures against troubles in the case where satisfactory image quality is not
provided are described in this station.
Take measures in accordance with actual state of the picture.
If the measures fail restore the device to the normal state, contact your local MIMAKI
distributor or MIMAKI office call for service.
While lines/thin spots are obvious or dark stripes occur
Corrective measure :
Corrective measure :
Corrective measure :
Corrective measure :
Characters fluctuate doubly or triply into paper feed
Corrective measure :
Displacement is observed between outward and inward printing
Corrective measure :
The respective color ink injected by the respective color heads do not properly overlap
Corrective measure :
Large ink drop on media
Corrective measure :
Execute the head cleaning.
Clean the interior of the station.
page 3.4 through 3.7, 5.4
Conduct the [MEDIA COMP.] function.
If slip of paper is present in the head path, for example, above
the media plate, remove it.
Conduct the [MEDIA COMP.] function.
Adjust "Y (outward and inward)" in [PRINT ADJUST] function.
page 5.12
Conduct the [PRINT ADJUST] function.
1.Execute the wiper cleaning.
2.Execute the ink caps cleaning.
3.Execute the head cleaning [normal].
- 6.4 -
(In the direction of travel of the head)
page 2.23
page 2.24
page 2.24
page 5.12
page 3.4
page 3.4
page 2.23