If image quality declines
Take measures as follows in accordance with the problem.
If the problem does not improve, contact your local MIMAKI distributor or MIMAKI office to call for service.
Development
Lines/blur
Large ink drop on media
Media is raised during printing and
printing stops.
Resolving nozzle clogging
If nozzle clogging is not resolved even the head cleaning operation of P.2-7 has been executed, check the
following.
Replace ink with the operation of P.4-4.
Before taking a phenomenon as a trouble
Corrective measure
(1) Execute the head cleaning. (
(2) If slip of paper is attached in the head path, remove it.
(1) Execute the head cleaning. (
(2) Remove the dust of the media.
(3) Clean the dust on the table.
(4) Clean the bottom surface of the carriage.
(
P.4-12)
(1) Set new media and start printing.
(2) Check ON/OFF of the vacuum.
(3) Fix the media with adhesive tape.
P.2-7)
P.2-7)
5-3
5