If Image Quality Declines - MIMAKI UJF-605C Operation Manual

If image quality declines

Corrective measures against troubles in the case where satisfactory image quality is not
provided are described in this station.
Take measures in accordance with actual state of the picture.
If the measures fail restore the device to the normal state, contact your local MIMAKI
distributor or MIMAKI office call for service.
Lines/thin spots are obvious occur
Corrective measure
Corrective measure
Corrective measure
Large ink drop on media
Corrective measure : 1. Execute the ink caps cleaning. (
Media is raised during printing and printing stops.
During printing, media may be raised due to the heat from the UV lamp, causing printing to
be stopped.
Corrective measure :Set new media and start printing.
: Execute the head cleaning. (
: Clean the interior of the station. (
: If slip of paper is present in the head path, for example,
above the work plate, remove it.
2. Execute the head cleaning [normal]. (
3. Dust the media.
4. Dust the table.
5. Execute the cleaning for the undersurface of the carriage.
( P.3-16)
- 6-3 -
P.2-20)
P.3-3)
P.3-3)
P.2-20)