Drawing Setup Conditions [List] - MIMAKI JV3-75SPII Operation Manual

Drawing setup conditions [LIST]

This function outputs the current settings of the device.
They are useful in carrying out maintenance of the device.
1. SET UP
2. PRINTadjust
3. REPLACE COUNTER : Indicates the number of times the ink cartridges are replaced.
4. VERSION
5. PARAMETER
STEPS:
1. Select the [LIST].
page 5.2.
2. Press the [ENTER] key.
Plotting starts automatically.
3. Press the [END] key twice.
The menu returns to the LOCAL mode.
: Indicates a value that is specified with the FUNCTION.
: Indicates a correction value for dot position.
: Indicates the version of the firmware and memory capacity of the
device.
: Used for service persons for maintenance.
- 5.23 -
MAINTENANCE
LIST
∗ REMOTE ∗
∗ ∗ LIST ∗ ∗
MAINTENANCE
LIST
< LOCAL >
TWICE
<ent>
<ent>
width : 1272 mm