Maintenance Functions; Drawing Setup Conditions [List] - MIMAKI Tx2-1600 Operation Manual

Maintenance functions

Press the [FUNCTION] key and set up the desired maintenance function.

Drawing setup conditions [LIST]

This function outputs the current settings of the printer.
They are useful in carrying out maintenance of the printer.
Explanation of the list
1. SETUP
2. PRINTadjust
3. REPLACE COUNTER : Indicates the number of times the ink cartridges are
4. VERSION
5. PARAMETER
STEPS:
1. Select [LIST] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
Printing the LIST is started.
The menu enters the LOCAL mode.
LIST
: Indicates a value that is specified with the FUNCTION.
: Indicates a correction value for dot position.
replaced.
: Indicates the version of the firmware and memory
capacity of the device.
: Used for service persons for maintenance.
- 4.4 -
M A I N T E N A N C E
L I S T < e n t >
P R I N T I N G
P L E A S E W A I T
< < L O C A L > >
w i d t h : 1 2 7 2 m m