Features of the PF8 Printers
Front Controls and Indicators
Status LED
Feed
button
PF8d
PF8d and PF8t Front Controls
PF8d/PF8t Printer User's Guide
This section describes the front controls and indicators, components
of the media compartment, and connections located on the rear of the
PF8d and PF8t printers.
The PF8 printers are controlled by a Power switch, a Feed button, and
a multi-color status LED.
The Power switch is located on the side of the PF8d and on the back of
the PF8t.
You can use the Feed button in two ways:
•
Tap it
A quick press-and-release causes the media to advance a short
distance out of the printer.
•
Hold it down
Holding the button down when the power is turned on causes the
printer to enter Media Sensing mode. The printer configuration
page prints when you release the button.
There are also cover open buttons located on each side of the printer
which you press to access the media compartment.
Status LED
Feed
button
Cover
open
button
Power
switch
PF8t
Chapter 1 — Using the PF8 Printers
Power
switch
Cover
open
button
3