Controls And Indicators; Power Led; Feed Button - Intermec EasyCoder E4 User Manual

Controls and Indicators

Power LED

Feed Button

Intermec EasyCoder E4 – User's Guide
The EasyCoder E4 has one control (the Feed button) and one
indicator (the Power LED.) The Power LED is tri-colored and
indicates the status of the printer.
LED shows
No light:
Green:
• Steady
• Flashing
Amber:
• Momentarily
Red:
• Steady
Power LED
Feed button
Press Feed to feed out a blank label, if no label design has been
downloaded to the printer.
Press Feed to print a label after a label design has been down-
loaded to the printer and the Feed button has been set up to
work as a Print button (see Chapter 3, "Operation/Printing a
Label"). You can also use Feed to print a test label (see Chapter 3,
"Operation/Printing Test Labels").
Chapter 2
Meaning
Power off
Power on
Busy (executing or receiving data)
During power on
Error condition, for example...
- Printhead lifted
- Out of media
- Out of ribbon
- Media jam in cutter
Installation
11