Controls And Indicators; Power Led; Feed Button - Intermec EasyCoder E4 Installation & Operation Manual

Controls and
Indicators

Power LED

Feed Button

Intermec EasyCoder E4 LinerLess – Installation & Operation Ed. 1
The EasyCoder E4 LinerLess has one control - the Feed button -
and one indicator - the Power LED. The Power LED is tri-coloured
and indicates the status of the EasyCoder E4 LinerLess.
LED shows
No light:
Green:
• Steady
• Flashing
• Single Flash
Amber:
• Steady
• Momentarily
Red:
• Steady
• Single flash
Power LED
Feed button
Press Feed to dispense a blank label, if no label design has been
downloaded to the printer.
Press Feed to print a label after a label design has been downloaded
to the printer and the Feed button has been set up to work as a Print
button (see page 14).
You can also use Feed to print a test label (see page 13).
Meaning
Power off
Power on
Busy (executing or receiving data)
Bar code successfully read
Bar code wand active (lasts max. 10 sec:s)
During power on
Bar code wand inactive
Error condition, e.g.
- Printhead lifted
- Out of paper
Bar code reading failed
Chapter 2 Installation
9