KVH Industries LTD9116MKIT User Manual page 84

Chapter 3: Operating the system
• <incoming port> is the port you defined in Remote management on
page 185.
Example: If the IP address of the terminal is 161.30.180.12 and the
You should now be connected to the built-in web interface of the terminal
from your remote computer.
Accessing the terminal using AT commands
After preparing the terminal as described in the previous sections, do as
follows to access it:
1. Make sure your remote computer has access to the Internet.
2. On the remote computer, start a Telnet session.
3. Select TCP/IP and type in the IP address and port number.
The IP address is the external IP address of the terminal (see step 3 on
page 70).
The port number is the number defined in the Remote management page
under AT commands (see page 185).
4. When the connection is established, type in your AT commands.
72
incoming port number defined in the Remote management
page in the web interface is 8080, enter
http://161.30.180.12:8080.
Using a computer