Chapter 4: Using the web interface
1. Select LAN > Port forwarding in the left navigation pane.
2. Select Enabled to generally enable port forwarding.
3. Type in the Incoming port range.
4. Type in the Destination IP address, which in this example is the IP address
of the mail server: 192.168.0.100.
5. Type in the Destination port range.
6. Repeat step 3 to step 5 to set up port forwarding to additional servers.
7. In the Active column, select which ports should have port forwarding
activated.
8. Click Apply.
You can now access the mail server from the Internet, using the public IP
address of the terminal.
If you do not know the IP address, you can look it up in the DASHBOARD of the
web interface under ONGOING DATA SESSIONS.
108
Setting up the interfaces