KVH Industries LTD9116MKIT User Manual page 122

Chapter 4: Using the web interface
3. Select the APN to use for PPPoE. You have the following options:
• SIM default. The APN is taken from the SIM card. This is the
recommended option, unless you have special requirements.
• Network assigned. The APN is assigned from the network.
• User defined. Type in the APN. APNs are provided from the Airtime
Provider.
4. Click Apply.
5. Restart the terminal for the setting to take effect.
For information on how to establish a connection with PPPoE, see Using
PPPoE (Point-to-Point Protocol over Ethernet) on page 73.
Setting up static routing
When you have an external gateway connected to your terminal, the terminal
is not automatically able to "see" the network on the other side of the
gateway. However, you can set up your terminal to communicate with a device
on the other side of a gateway, by using Static routing.
To set up a new device for static routing, do as follows:
1. Select SETTINGS > LAN > Static route.
110 Setting up the interfaces