KVH Industries LTD9116MKIT User Manual page 155

the terminal establishes a packet data connection (PDP context) with the
settings defined in the belonging network user group, and the device is
ready for use with the terminal.
Access to the network management settings
Access to the network management settings requires an administrator
password. The default user name is admin and the default password is 1234.
The administrator can create and manage network user groups and set up a
network classification table defining priorities for devices, network user
groups and LAN ports.
Caution!
Setting up the network user groups
Overview
A network user group, in this context, is a group of network users sharing the
same Quality of Service profile and network parameters.
There are 11 configurable network user groups. For the Default network user
group certain settings are locked to make sure there is always one functional
network user group available. For example, the Default network user group
cannot be disabled and does not allow you to select a Bridge mode
connection.
The network user groups cannot be deleted. If you do not want to
Note
use them, click Edit and select Disabled at Status in the NETWORK
USER GROUP field.
All user connections to the LAN interface may be
affected when you change the settings below,
including your own current connection.
Managing LAN network users
Chapter 4: Using the web interface
143