KVH Industries LTD9116MKIT User Manual page 234

Chapter 5: Troubleshooting
ID
0802E
Firmware is
older than
current antenna
version
0802F
Antenna main
image could not
be loaded
08030
Antenna could
not enter main
application
mode
08031
Failed to enter
normal
operation
08032
Firmware image
version lower
than active
antenna version
08033
Firmware image
doesn't support
antenna
hardware
08034
Antenna failed
to exit Flash
Manager. Power
cycle needed
222
Event Text
Status signalling
Explanation
The firmware in the
antenna is newer
than expected by the
terminal.
Antenna failed to
start up normally.
Antenna failed to
start up normally.
Antenna failed to
start up normally.
The firmware in the
antenna is newer
than expected by the
terminal.
The antenna
hardware version is
not supported by the
terminal.
New firmware was
successfully
uploaded to the
antenna but the
antenna failed to
start normally with
the new firmware.
Remedy
Update the terminal
software.
Reboot the terminal.
Contact your
distributor if the
problem persists.
Reboot the terminal.
Contact your
distributor if the
problem persists.
Reboot the terminal.
Contact your
distributor if the
problem persists.
Update the terminal
software.
Contact your
distributor.
Reboot the terminal.
Contact your
distributor if the
problem persists.