KVH Industries LTD9116MKIT User Manual page 38

Starting up the TracPhone FleetBroadband IP Handset
The following procedure is for the TracPhone FleetBroadband IP Handset. The
procedure may be different for another type of IP handset.
By default, a handset connected to the LAN interface on the terminal
Note
is automatically registered in the terminal and assigned the first
available local number. For information on how to configure
handsets, see Connecting and configuring IP handsets on page 127.
To start up the IP Handset, do as follows:
1. Connect the Ethernet cable from the IP Handset/cradle to one of the LAN
(PoE) connectors on the terminal as described in the user manual for the
handset.
2. The handset starts up automatically.
When the display shows this symbol
handset is ready for making a call.
If the handset is not ready for making calls, it may be because the BGAN
terminal is waiting for a SIM PIN. To check this, enter the handset menu
system and select BGAN > Status > PIN status.
You can enter the SIM PIN using the IP handset. For details, see Entering the
SIM PIN using a phone or IP handset on page 28.
Connecting the TracPhone FleetBroadband IP handset
Chapter 2: Getting started
in the upper right corner, the
25