KVH Industries LTD9116MKIT User Manual page 143

3. For each handset, select the call types you want to enable for incoming and
outgoing calls.
The call types are described in more detail in Selecting the call type on
page 45.
• For Incoming calls, you can select Standard or 3.1 kHz Audio or both.
If you select both, the handset will react (ring) on any incoming call.
If, for example, you select Standard, the handset will only react on calls
made to the Standard phone number.
• For Outgoing calls, you can select either Standard or 3.1 kHz Audio. The
selected type will be used by default, if possible, for any outgoing call.
4. Click Apply.
Setting up the IP handset compatibility
If you are connecting your TracPhone FleetBroadband IP Handset(s) to the
terminal through a separate router with NAT, you must use TracPhone
FleetBroadband IP handsets with software version 1.8 or newer and set up the
handset compatibility in the web interface of the terminal as described below.
To see the software version of your TracPhone FleetBroadband IP Handset,
select MENU > Status > Software version in the TracPhone FleetBroadband IP
Handset.
To change the TracPhone FleetBroadband IP Handset compatibility, do as
follows:
1. Select Settings > IP handsets > Server settings.
Chapter 4: Using the web interface
Setting up the interfaces 131