Handling waiting calls
During a call, if a second party tries to call you, you may hear a Call Waiting
indication. The Call Waiting indication is two beeps and a pause of 3 seconds,
then two beeps again etc. If no action is taken, the waiting call is released.
In the web interface you can enable or disable the call waiting indication. For
further information, see Call waiting on page 122.
Different types of phone have different methods/keys for the
Note
functions listed below. If you have another type of phone than the
ones listed below, refer to the documentation for your
phone/handset.
Analogue 2-wire phones with R key: When you receive a Call Waiting
indication, you have the following options:
If you want to:
Clear the current call,
and accept the waiting call.
Hold the current call,
and accept the waiting call.
Ignore the waiting call.
Reject the waiting call.
Do as follows (standard 2-wire phone):
Press R 1 #
Press R 2 #
Take no action.
Press R 0 #
Using a phone or fax machine
Chapter 3: Operating the system
55