Chapter 4: Using the web interface
Setting the call types for IP handsets
In the Call settings page you can set the call types for each local number and
see whether Restricted dialling is enabled for that number. For further
information on Restricted dialling, see Restricted dialling on page 190.
To set the call types for IP handsets, do as follows:
1. Select SETTINGS > IP handsets > Call settings.
2. If you have additional numbers from your airtime provider and you want to
assign them to the IP handsets, use the Assigned number drop down list to
select the number you want to use for each handset.
When this number is called, only the assigned handset will ring.
Note
130
To be able to use the additional numbers, you must first select
Use additional numbers in the Multi-voice page and enter the
additional numbers under PHONE BOOK > Mobile numbers. See
Multi-voice on page 192.
Setting up the interfaces