KVH Industries LTD9116MKIT User Manual page 59

Phone numbers for incoming calls
The mobile numbers for your system are listed in your airtime subscription.
For example, you may have
• 1 number for Standard Voice
• 1 number for 3.1 kHz Audio
• 1 number for UDI data
• 1 number for RDI data
If you have subscribed to the optional Multi-voice feature you may also have
Additional numbers, which can be assigned to individual handsets. For further
information, see Additional numbers for Multi-voice on page 64.
The call type you are using must be selected in the web interface
Note
(refer to the next section).
If the mobile numbers are listed in the web interface, you can look them up as
follows:
Connect a computer, access the web interface and select PHONE BOOK >
Mobile numbers. For further information, see Viewing and editing the mobile
numbers on page 92.
For information on how to make a call to the terminal, see Making a call to the
terminal on page 50.
Selecting the incoming call type
To select which call types are accepted for an incoming call, use a computer
and the web interface. If you are using Multi-voice, see Handset contexts on
page 61.
• ISDN. Select the call type under SETTINGS > ISDN.
For further information, see Configuring the ISDN interface on page 114.
• Phone/Fax. Select the call type for each port under SETTINGS > Phone/Fax.
For further details, see Configuring the Phone/Fax interface on page 112.
• IP handset. Select the call type for each handset in the web interface under
SETTINGS > IP Handset > Call settings. For further information, see Setting
the call types for IP handsets on page 130.
Using a phone or fax machine
Chapter 3: Operating the system
47