KVH Industries LTD9116MKIT User Manual page 124

Chapter 4: Using the web interface
Configuring the Phone/Fax interface
To configure the Phone/Fax interface do as follows:
1. Select SETTINGS > Phone/Fax from the left navigation pane.
2. If you have additional numbers from your airtime provider and you want to
assign them to the Phone/Fax ports, use the Assigned number drop down
list to select the number you want to use for each port.
When this number is called, only the handset connected to that port will
ring.
Note
3. For each Phone/Fax port, set the call type for incoming and outgoing calls.
Note
112
To be able to use the additional numbers, you must first select
Use additional numbers in the Multi-voice page and enter the
additional numbers under PHONE BOOK > Mobile numbers. See
Multi-voice on page 192.
Port 1 is the connector closest to the antenna connector, and Port
2 is the connector closest to the ISDN connector.
Setting up the interfaces