Table of Contents
Advertisement
Chapter 3: Operating the system
Selecting the default outgoing call type
To select the default call type for outgoing calls, do as follows:
•
ISDN. Select the call type in the web interface under SETTINGS > ISDN.
For further information, see Configuring the ISDN interface on page 114.
•
Phone/Fax. Select the call type for each port in the web interface under
SETTINGS > Phone/Fax. For further information, see Configuring the
Phone/Fax interface on page 112.
•
IP handset. Select the call type for each handset in the web interface under
SETTINGS > IP Handset > Call settings. For further information, see Setting
the call types for IP handsets on page 130.
Overriding the default outgoing call type
To override the default setting for a specific outgoing call, do as follows:
•
To use Standard Voice for the call,
dial 1* before the number.
•
To use 3.1 kHz Audio for the call,
dial 2* before the number.
Example: To make a call to the number +45 39558800, forcing the
connection to use Standard Voice, dial 1* 0045 39558800 followed
by # if calling from an analogue or ISDN phone, or off-hook key if
calling from an IP handset.
This will not change the default call type, only the type used for the
Note
ongoing call.
46
Using a phone or fax machine
Advertisement
Table of Contents
Troubleshooting
