KVH Industries LTD9116MKIT User Manual page 162

Chapter 4: Using the web interface
Locking an IP address to a MAC address
When the device is locked to an IP address, the terminal will always assign
this IP address to the MAC address of this device (if DHCP is enabled and the
Internet connection is not a Bridge mode connection).
To lock a device to its current IP address, click the link next to the device.
The device is then locked to the current IP address and added to the list of
locked IP addresses at the top of the page.
To unlock a device from the IP address, click Delete next to the device in the
LOCKED IP ADDRESSES list.
Using the network classification table
Overview
The network classification table is used to define which network devices, IP
addresses and/or LAN ports are associated with which network user groups.
Each entry in the table shows MAC address, IP address, LAN port and network
user group.
When a network device is connected, the terminal runs through the network
classification table to check if the new connection matches MAC address, IP
address and LAN port in any of the entries in the table. When a match is
found, the terminal establishes a PDP context with the settings of the network
user group assigned in the matching entry. The device is now ready for use
with the terminal.
150 Managing LAN network users