Chapter 4: Using the web interface
2. For each item under ALLOW USERS TO:, select
•
yes to allow access or
•
no to block access to the settings.
Change general settings means change the settings on the SETTINGS main
page, that is enabling/disabling the L-Band interface.
Control connections from IP handsets means to start/stop data sessions
using the main IP handset (handset with the number 0501).
3. At ALLOW AT COMMANDS ON:, select
•
yes to allow the use of AT commands on the LAN interface, or
•
no to block the use of AT commands on the LAN interface.
Note
AT commands are low-level commands used to control modems, in this
case the TracPhone terminal. They are typically used during service and
maintenance or when troubleshooting the terminal.
4. Click Apply.
The settings to which access is denied are now greyed out for the non-
administrator user.
184
This setting does not take effect until the terminal is restarted.
Administration