Table of Contents
Advertisement
Chapter 4: Using the web interface
7. Under Distance report, select Enabled or Disabled and type in the
following:
•
When moved. Enter the distance the vessel should be moved before
sending a report.
•
Max one report per. Enter the minimum time that should pass between
two reports.
Example: The distance is set to 1000 m and the time is set to 15 minutes.
8. Click Apply.
140
The TracPhone system has moved 1000 m since last report, but
only 5 minutes have passed. A report will not be sent until the
15 minutes have passed.
Setting up the interfaces
Advertisement
Table of Contents
Troubleshooting
