KVH Industries LTD9116MKIT User Manual page 125

The call types are described in more detail in Selecting the call type on
page 45.
• For Incoming calls, you can select Standard or 3.1 kHz Audio or both.
If you select both, any device connected to the Phone/Fax interface will
react (ring) on incoming calls.
If you select e.g. Standard, the Phone/Fax interface will only react on
calls made to the Standard phone number.
• For Outgoing calls, you can select either Standard or 3.1 kHz Audio. The
selected type will be used by default, if possible, for any outgoing call.
Note, however, that fax machines must use 3.1 kHz Audio.
You can override the default setting for outgoing calls by
Note
dialling 1* (force the call to Standard) or 2* (force the call to 3.1
kHz Audio) before the number. For further information, see
Overriding the default outgoing call type on page 46.
4. For each port you can see whether or not Restricted dialling is enabled. For
further information, see Restricted dialling on page 190.
5. Click Apply.
Chapter 4: Using the web interface
Setting up the interfaces 113