Table of Contents
Advertisement
// Read the Device ID parameter
Pylon::String_t deviceID = Camera.DeviceFirmwareVersion.GetValue();
// Write and read the Device User ID
Camera.DeviceUserID = "custom name";
Pylon::String_t deviceUserID = Camera.DeviceUserID.GetValue();
// Read the Sensor Width parameter
int64_t sensorWidth = Camera.SensorWidth.GetValue();
// Read the Sensor Height parameter
int64_t sensorHeight = Camera.SensorHeight.GetValue();
// Read the Max Width parameter
int64_t maxWidth = Camera.WidthMax.GetValue();
// Read the Max Height parameter
int64_t maxHeight = Camera.HeightMax.GetValue();
For detailed information about using the pylon API, refer to the Basler pylon Programmer's Guide
and API Reference.
You can also use the Basler pylon Viewer application to easily read the parameters and to read or
write the Device User ID.
You can use the Basler pylon IP Configuration tool to read or write the Device User ID.
For more information about the pylon Viewer, see Section 2.2 on
page
40.
For more information about the pylon IP Configuration Tool, see Section 5.4 on
Basler pioneer
Standard Features
page 20
and Section 2.4 on
page
69.
201
Advertisement
Table of Contents
