Basler Pioneer User Manual page 82

Camera and Network Adapter IP Configuration
4. When you are finished making changes, click the Write Configuration button.
A message will appear indicating that the camera is restarting its IP configuration cycle as
shown below. When this message disappears the changes to the IP configuration will be in
place and the IP Configurator window will now show the changed settings.
Note
When you configure a camera to use either a temporary or a fixed address,
there are some things that you must keep in mind:
72
For a camera to communicate properly, it must be in the same subnet as
the adapter to which it is connected.
The camera must have an IP address that is unique within the network.
The recommended range for fixed IP addresses is from 172.16.0.1 to
172.32.255.254 and from 192.168.0.1 to 192.168.255.254. These
address ranges have been reserved for private use according to IP
standards.
If your PC has multiple network adapters, each adapter must be in a
different subnet.
Basler pioneer