Table of Contents
Advertisement
Software and Hardware Installation
5. A Customer Information window will open. Enter the appropriate information and click the Next
button.
6. A Setup Type window will open.
a. Choose Custom Installation.
b. Deselect all components of the software that you do not want to install.
c. Click the Next button
7. A Ready to Install the Program window will open.
Click the Install button.
8. If a warning message appears indicating that Windows logo testing was not passed, click
Continue Anyway.
This action may be required several times.
9. When the installation process is complete, a Completed window will open. Click the Finish
button.
10. An Installer Information window may open informing about the need to restart the computer.
If you want to restart the computer now, click the Yes button.
If you want to restart the computer later, click the No button.
If the Installer Information window does not open, there is no need to restart the computer.
The installation of the software component is complete.
Note
If you installed the Basler filter driver and if you are using a Fast Ethernet or
non-compliant GigE network adapter:
36
Note
If applicable, close all applications needing network connection before
proceeding. Otherwise, the network connections for your applications will
temporarily be lost.
Make sure to configure the Fast Ethernet or non-compatible GigE
network adapter to be used with your cameras as described in the
"Configuring a Non-compatible GigE or a Fast Ethernet Network Adapter
Used with Your Cameras" section.
If you are using several adapters, you must configure each Fast Ethernet
or non-compatible GigE network adapter to be used with your cameras
individually.
Basler pioneer
Advertisement
Table of Contents
