Precautions - Basler Pioneer User Manual

Specifications, Requirements, and Precautions

1.7 Precautions

Avoid Dust on the Sensor
The camera is shipped with a cap on the lens mount. To avoid collecting dust
on the camera's IR cut filter (color cameras) or sensor (mono cameras), make
sure that you always put the cap in place when there is no lens mounted on
CAUTION
the camera.
Lens Thread Length is Limited
Color models of the camera with a C-mount lens adapter are equipped with an
IR cut filter mounted inside of the adapter. The location of this filter limits the
length of the threads on any lens you use with the camera. If a lens with a very
CAUTION
long thread length is used, the IR cut filter will be damaged or destroyed and
the camera will no longer operate.
For more specific information about the lens thread length, see Section 1.5.3 on
Voltage Outside of Specified Range Can Damage the Camera
If the voltage of the input power to the camera is greater than +24 VDC
damage to the camera can result. If the voltage is less than +12 VDC, the
camera may operate erratically.
CAUTION
An Incorrect Plug Can Damage the 12-pin Connector
The plug on the cable that you attach to the camera's 12-pin connector must
have 12 pins. Use of a smaller plug, such as one with 10 pins or 8 pins, can
damage the pins in the camera's 12-pin connector.
CAUTION
16
page 14.
Basler pioneer