Basler Pioneer User Manual page 209

Standard Features
Test Image 4 - Moving Diagonal Gray Gradient Feature Test (8 bit)
The basic appearance of test image 4 is similar to test image 2 (the 8 bit moving diagonal gray
gradient image). The difference between test image 4 and test image 2 is this: if a camera feature
that involves digital processing is enabled, test image 4 will show the effects of the feature while
test image 2 will not. This makes test image 4 useful for checking the effects of digital features such
as the luminance lookup table.
Test Image 5 - Moving Diagonal Gray Gradient Feature Test (12 bit)
The basic appearance of test image 5 is similar to test image 3 (the 12 bit moving diagonal gray
gradient image). The difference between test image 5 and test image 3 is this: if a camera feature
that involves digital processing is enabled, test image 5 will show the effects of the feature while
test image 3 will not. This makes test image 5 useful for checking the effects of digital features such
as the luminance lookup table
Test Image 6 - Moving Diagonal Color Gradient
The moving diagonal color gradient test image is available on color cameras only and is designed
for use when the camera is set for YUV output. As shown in Figure 52, test image six consists of
diagonal color gradients. The image moves by one pixel from right to left whenever you signal the
camera to capture a new image. To display this test pattern on a monitor, you must convert the YUV
output from the camera to 8 bit RGB.
Fig. 52: Test Image Six
Basler pioneer 199