Table of Contents
Advertisement
Software and Hardware Installation
8. If a warning message appears indicating that Windows logo testing was not passed, click
Continue Anyway.
This action may be required several times.
9. When the installation process is complete, a Completed window will open. Click the Finish
button.
10. An Installer Information window may open informing about the need to restart the computer.
If you want to restart the computer now, click the Yes button.
If you want to restart the computer later, click the No button.
If the Installer Information window does not open, there is no need to restart the computer.
11. Note that the installation program has added shortcuts to the desktop for the Pylon Viewer and
the Pylon IP Configuration Tool.
12. Click Start, click All Programs, click Basler Vision Technologies, and click Pylon 1.0. Note that
shortcuts are available for the Pylon IP Configuration Tool, the Pylon Viewer, and the Speed-O-
Meter tool.
The pylon Viewer installation is complete.
Note
If you installed the Basler filter driver as part of the Basler pylon Viewer
installation (i.e. if you did not deselect the Basler filter driver) and if you are
using a Fast Ethernet or non-compatible GigE network adapter:
28
Make sure to configure the Fast Ethernet or non-compatible GigE
network adapter to be used with your cameras as described in the
"Configuring a Non-compatible GigE or a Fast Ethernet Network Adapter
Used with Your Cameras" section.
If you are using several adapters, you must configure each Fast Ethernet
or non-compatible GigE network adapter to be used with your cameras
individually.
Basler pioneer
Advertisement
Table of Contents
