Connector Pin Assignments And Numbering; 12-Pin Receptacle Pin Assignments - Basler Pioneer User Manual

Physical Interface
9.2 Connector Pin Assignments
and Numbering
9.2.1

12-Pin Receptacle Pin Assignments

The 12 pin receptacle is used to access the two physical input lines and four physical output lines
on the camera. It is also used to supply power to the camera. The pin assignments for the
receptacle are shown in Table 4.
Pin Designation
1 Camera Input Power Gnd *
2 Camera Input Power Gnd *
3 I/O Input 1 (+5 to +24 VDC)
4 I/O Input 2 (+5 to +24 VDC)
5 I/O Input Gnd
6 I/O Output 1
7 I/O Output 2
8 Camera Input Power VCC ** (+12 to +24 VDC)
9 Camera Input Power VCC ** (+12 to +24 VDC)
10 I/O Output VCC (+5 to +24 VDC)
11 I/O Output 3
12 I/O Output 4
Table 4: Pin Assignments for the 12-pin Receptacle
Note
* Pins 1 and 2 are tied together inside of the camera.
** Pins 8 and 9 are tied together inside of the camera.
To avoid a voltage drop with long input power wires, we recommend that you
supply input power VCC through separate wires between your power supply
and pins 8 and 9 on the camera. We also recommend that you supply input
power ground through separate wires between your power supply and pins 1
and 2 on the camera.
102 Basler pioneer