Basler Pioneer User Manual page 52

Software and Hardware Installation
7. Change the Black Level setting to a value between 16 and 32 and change the Gain setting to
its lowest allowed value:
a. In the Camera Properties Pane, click the + Sign beside your camera's name. A list of setting
categories will appear.
b. Click the + Sign beside the Analog Controls category. The controls for setting Gain and
Black Level will appear as shown below.
You can set the Black Level by using the slider that appears next to the value box, by using
the up / down arrows that appear next to the value box, or by typing a new value into the
box.
You can set the Gain by using the slider that appears next to the value box, by using the up
/ down arrows that appear next to the value box, or by typing a new value into the box.
42 Basler pioneer