Basler Pioneer User Manual page 36

Gige vision cameras
Table of Contents

Advertisement

Software and Hardware Installation
7. A Ready to Install the Program window will open.
Click the Install button.
8. If a warning message appears indicating that Windows logo testing was not passed, click
Continue Anyway.
This action may be required several times.
9. When the installation process is complete, a Completed window will open. Click the Finish
button.
10. An Installer Information window may open informing about the need to restart the computer.
If you want to restart the computer now, click the Yes button.
If you want to restart the computer later, click the No button.
If the Installer Information window does not open, there is no need to restart the computer.
11. Note that the installation program has added shortcuts to the desktop for the Pylon Viewer and
the Pylon IP Configuration Tool.
12. Click Start, click All Programs, click Basler Vision Technologies, and click Pylon 1.0. Note that
shortcuts are available for the Pylon IP Configuration Tool, the Pylon Viewer, and the Speed-O-
Meter tool. Also notice that there are shortcuts to the Programmer's Guide and Reference
Documentation (i.e., the HTML version of the programmer's guide and API reference) and to
the sample programs included with the SDK.
The SDK installation is complete.
Note
If you installed the Basler filter driver as part of the Basler pylon SDK
installation (i.e. if you did not deselect the Basler filter driver) and if you are
using a Fast Ethernet or non-compatible GigE network adapter:
26
Note
If applicable, close all applications needing network connection before
proceeding. Otherwise, the network connections for your applications will
temporarily be lost.
Make sure to configure the Fast Ethernet or non-compatible GigE
network adapter to be used with your cameras as described in the
"Configuring a Non-compatible GigE or a Fast Ethernet Network Adapter
Used with Your Cameras" section.
If you are using several adapters, you must configure each Fast Ethernet
or non-compatible GigE network adapter to be used with your cameras
individually.
Basler pioneer

Advertisement

Table of Contents
loading

Table of Contents