9.7.3
Output Line Response Time
Response times for the output lines on the camera are as shown below.
Camera
Output
Signal
Output
Line
Voltage
RT
Fig. 30: Output Line Response Times
Time Delay Rise (TDR) = 1.5 µs
Rise Time (RT) = 1.3 - 5.0 µs
Time Delay Fall (TDF) = 1 - 20 µs
Fall Time (FT) = 1 - 5 µs
Note
The response times for the output lines on your camera will fall into the ranges
specified above. The exact response time for your specific application will
depend on the external resistor and the applied voltage you use.
Basler pioneer
TDR
90%
TDF
Time
FT
90%
Physical Interface
111