Table of Contents
Advertisement
more robust packet resend mechanism.
The Basler pylon 1394 driver - a camera driver for IEEE 1394 cameras.
The Basler pylon Direct Show driver - a driver for use in combination with applications that
display images using the Windows Direct Show module.
The IP Configuration Tool - a tool for changing the IP configuration of the camera.
The Speed-O-Meter - a tool for monitoring the camera's frame rate and its bandwidth usage.
For more information about compatible Intel chipsets, see Section 4.1 on
If you already have an older version of the pylon software on your computer, go through the
software installation procedure in this manner:
First, go to the "Removing Older Pylon Software" section and remove the older software if
necessary.
Next, read the "What Happens When Installing a Basler GigE Vision Network Driver" section.
Next,
if you want to use the SDK, go to the "Installing the pylon SDK" section and install the SDK.
if you do not want to use the SDK, go to the "Installing the pylon Viewer" section and install
the Basler pylon Viewer software.
if you only want to install an individual software component that is not included in your
current Basler pylon installation, see the next step.
Next, go to the "Adjusting the Installation" section to configure any Fast Ethernet or non-
compatible network adapter used for the camera and to adjust the installation if necessary. The
adjustments may, for example, involve reestablishing an original network driver-network
adapter association, unbinding a Basler network driver from a network adapter, or installing an
individual software component that is not included in your current Basler pylon installation.
If you will be connecting cameras to more than one network adapter in a single PC, read the
"Using Multiple Adapters in One PC" section.
If there is no pylon software on your computer, go through the software installation procedure
in this manner:
First, read the "What Happens When Installing a Basler GigE Vision Network Driver" section.
Next,
if you want to use the SDK, go to the "Installing the pylon SDK" section and install the SDK.
if you do not want to use the SDK, go to the "Installing the pylon Viewer" section and install
the Basler pylon Viewer software.
Next, go to the "Adjusting the Installation" section to configure any Fast Ethernet or non-
compatible network adapter used for the camera and to adjust the installation if necessary. The
adjustments may, for example, involve reestablishing an original network driver-network
adapter association, unbinding a Basler network driver from a network adapter, or installing an
individual software component that is not included in your current Basler pylon installation.
If you will be connecting cameras to more than one network adapter in a single PC, read the
"Using Multiple Adapters in One PC" section.
Basler pioneer
Software and Hardware Installation
page
53.
21
Advertisement
Table of Contents
