Table of Contents
Advertisement
Camera.Height.SetValue( 200 );
Camera.OffsetY.SetValue( 100 );
For detailed information about using the pylon API, refer to the Basler pylon Programmer's Guide
and API Reference.
You can also use the Basler pylon Viewer application to easily set the parameters.
For more information about the pylon Viewer, see Section 2.2 on
page
40.
13.5.1 Changing AOI Parameters "On-the-Fly"
Making AOI parameter changes "on-the-fly" means making the parameter changes while the
camera is capturing images continuously. On-the-fly changes are only allowed for the parameters
that determine the position of the AOI, i.e., the X Offset and Y Offset parameters. Changes to the
AOI size are not allowed on-the-fly.
Basler pioneer
Standard Features
page
20and Section 2.4 on
187
Advertisement
Table of Contents
