Basler Pioneer User Manual page 78

Camera and Network Adapter IP Configuration
Note
For auto IP assignment to work correctly, the network adapter that the camera
is plugged into must also be set for auto IP assignment or it must be set for a
fixed address in the auto IP address range.
Note
If you have multiple network adapters in your PC, only one adapter can be set
to use auto IP assignment. If more than one adapter is set to use auto
assignment, auto assignment will not work correctly and the cameras will not
be able to connect to the network.
In the case of multiple network adapters, it is best to assign fixed IP addresses
to the adapters and to the cameras. You can also set the cameras and the
adapters for DHCP addressing and install a DHCP server on your network.
The next sections in this chapter of the manual describe how to change the IP
configuration on the cameras. See the earlier sections in this chapter for
information about changing the IP configuration of network adapters.
68 Basler pioneer