Software and Hardware Installation
Go on to step 8.
8.
Click on the Alternate Configuration tab.
a. Make sure that the Automatic private IP address radio button is selected as shown below.
b. Click the OK button on the Internet Protocol Properties window.
c. Click the Close button on the Local Area Connection Properties window.
9. If you have only one Fast Ethernet or non-compatible network adapter in the PC, the
configuration for the filter driver is complete and you can close the Network Connections
window and exit this procedure.
If you have more than one Fast Ethernet or non-compatible network adapter in the PC, return
to step 1, select one of the other adapters, and perform steps 2 through 9 for each adapter.
32
Basler pioneer