Table of Contents
Advertisement
// set camera in continous mode
Camera.AcquisitionMode.SetValue( AcquisitionMode_Continuous );
// set a frame rate and getting the resulting frame rate
Camera.AcquisitionFrameRateEnable.SetValue( true );
Camera.AcquisitionFrameRateAbs.SetValue( 20.5 );
double resultingFrameRate = Camera.ResultingFrameRateAbs.GetValue();
You can also execute the Acquisition Start and Stop commands by using the API.
For detailed information about using the pylon API, refer to the Basler pylon Programmer's Guide
and API Reference.
You can also use the Basler pylon Viewer application to easily set the parameters.
For more information about the pylon Viewer, see Section 2.2 on
page
40.
For more information about the camera's exposure time parameter, see Section 10.4 on
For more information about determining the maximum allowed acquisition frame rate, see
Section 10.9 on
page
137.
Note
The explanations in Section 10.1.2 and Section 10.1.3 are intended to give
you a basic idea of how parameters alone can be used to control image
acquisition. For a more complete description, refer to the Basler pylon
Programmer's Guide and to the sample programs included in the Basler pylon
Software Development Kit (SDK).
Basler pioneer
Image Acquisition Control
page 20
and Section 2.4 on
page
127.
115
Advertisement
Table of Contents
