Physical Interface; General Description Of The Connections - Basler Pioneer User Manual

9 Physical Interface

This section provides detailed information, such as pinouts and voltage requirements, for the
physical interface on the camera. This information will be especially useful during your initial design-
in process.

9.1 General Description of the Connections

The camera is interfaced to external circuity via connectors located on the back of the housing:
An 8-pin, RJ-45 jack used to provide a 100/1000 Mbit/s Ethernet connection to the camera.
This jack includes a green LED and a yellow LED that indicate the state of the network
connection.
A 12-pin receptacle used to provide access to the camera's I/O lines and to provide input
power to the camera.
The drawing below shows the location of the two connectors and the LEDs.
8-pin
RJ-45
Jack
Green LED
Fig. 24: Camera Connectors and LED
Basler pioneer
Yellow LED
Physical Interface
12-pin
Receptacle
101